Spatial distribution and concentration assessment of total petroleum hydrocarbons in the intertidal zone surface sediment of Todos os Santos Bay, Brazil

The primary objective of this study was to investigate the concentrations and spatial distribution of the total petroleum hydrocarbons (TPHs) in the intertidal zone surface sediment of Todos os Santos Bay, Brazil, to assess the distribution and degree of contamination by TPHs, measure the level of TPH degradation in the surface sediment, and identify the organic matter sources. The surface sediment used in this study was collected in 50 stations, and TPHs, isoprenoid alkanes (pristane and phytane), and unresolved complex mixture (UCM) were analyzed by gas chromatography with a flame ionization detector. The total concentrations ranged from 0.22 to 40,101 μg g^?1 dry weight and showed a strong correlation with the total organic carbon (TOC) content. The highest TPH concentrations were observed in samples from the mangrove sediments of a river located near a petroleum refinery. Compared with other studies in the world, the TPH concentrations in the intertidal surface sediment of Todos os Santos Bay were below average in certain stations and above average in others. An analysis of the magnitude of UCM (0.11 to 17,323 μg g^?1 dry weight) and the ratios nC17/Pr and nC18/Ph suggest that an advanced state of oil weathering, which indicates previous contamination. The molar C/N ratios varied between 5 and 43, which indicate organic matter with a mixed origin comprising marine and continental contributions.     

Loss of crop yields in India due to surface ozone: an estimation based on a network of observations

Surface ozone is mainly produced by photochemical reactions involving various anthropogenic pollutants, whose emissions are increasing rapidly in India due to fast-growing anthropogenic activities. This study estimates the losses of wheat and rice crop yields using surface ozone observations from a group of 17 sites, for the first time, covering different parts of India. We used the mean ozone for 7 h during the day (M7) and accumulated ozone over a threshold of 40 ppbv (AOT40) metrics for the calculation of crop losses for the northern, eastern, western and southern regions of India. Our estimates show the highest annual loss of wheat (about 9 million ton) in the northern India, one of the most polluted regions in India, and that of rice (about 2.6 million ton) in the eastern region. The total all India annual loss of 4.0–14.2 million ton (4.2–15.0%) for wheat and 0.3–6.7 million ton (0.3–6.3%) for rice are estimated. The results show lower crop loss for rice than that of wheat mainly due to lower surface ozone levels during the cropping season after the Indian summer monsoon. These estimates based on a network of observation sites show lower losses than earlier estimates based on limited observations and much lower losses compared to global model estimates. However, these losses are slightly higher compared to a regional model estimate. Further, the results show large differences in the loss rates of both the two crops using the M7 and AOT40 metrics. This study also confirms that AOT40 cannot be fit with a linear relation over the Indian region and suggests for the need of new metrics that are based on factors suitable for this region.     

Green synthesis, characterization and antimicrobial activity of silver nanoparticles using methanolic root extracts of Diospyros sylvatica

The current research study focuses to formulate the biosynthesized silver nanoparticles for the first time from silver acetate using methanolic root extracts of Diospyros sylvatica, a member of family Ebenaceae. TEM analysis revealed the average diameter of Ag NPs around 8 nm which is in good agreement with the average crystallite size (10 nm) calculated from X-ray Diffraction (XRD) analysis. Further the study has been extended to the antimicrobial activity against test pathogenic Gram (+) ve, Gram (−) ve bacterial and fungal strains. The bioinspired Ag-NP showed promising activity against all the tested bacterial strains and the activity was enhanced with increased dosage levels.     

Analytical prediction of stepped feature generation in multi-pass single point incremental forming

Single point incremental forming (SPIF) is a new sheet metal forming process characterized by higher formability, product independent tooling and greater process flexibility. The inability of conventional single pass SPIF to form vertical walls without failure is overcome by forming multiple intermediate shapes before forming the final component, i.e., multi-pass single point incremental forming (MSPIF). A major issue with MSPIF is significant geometric inaccuracy of the formed component, due to the generation of stepped features on the base. This work proposes analytical formulations that are shown to accurately and quantitatively predict the stepped feature formation in MSPIF. Additionally, a relationship is derived among the material constants used in these analytical equations, the yield stress and thickness of the blank material, such that the computational effort required for the calibration of these constants can be minimized. Finally, the physical effects of yield stress and sheet thickness on the rigid body translation are further discussed.     

Biocatalytic polymeric membranes to decrease biofilm fouling and remove organic contaminants in wastewater: a review

The presence of recalcitrant contaminants in wastewater is major challenge to decrease pollution and associated health issues. As a consequence, membrane technologies have recently attracted industrial attention, yet a major setback of membrane employment is membrane fouling which leads to frequent discarding of membrane modules. More than 45% of all membrane fouling cases are caused by biofilms that are resistant to antimicrobial agents. Here we review polymeric membranes with antifouling properties, with focus on surface properties, fabrication, characterization, biocatalysis using enzymes and application towards the removal of dyes, phenol, pesticides and fertilizers. Nano-engineered fabrication of polymeric membranes allow to decrease fouling by 80–90%. Immobilized oxidoreductases in polymeric membranes allow 65–98% removal contaminants in wastewater.

     

Factors influencing NOx emission of a stationary diesel engine fuelled with crude rice bran oil methyl ester blend – Taguchi approach

The main objective of this work is to control the NO_x emission of a stationary diesel engine fuelled with crude rice bran oil methyl ester blend with less sacrifice on smoke density and brake thermal efficiency (BTE) and also to investigate the factors influencing the objective. Fuel injection timing, percentage of exhaust gas recirculation and fuel injection pressure are chosen as the promising factors for the objective and NO_x emission, smoke density and BTE are considered as response variables. Tests were conducted as per Taguchi’s L₉ orthogonal array and the most influencing factor for each response variable and also the significance of each factor on the same was found out through analysis of variance (ANOVA). Response graph was drawn for each response variable and from the results of response graph and ANOVA the optimum combination of the factor levels in achieving the objective was obtained and the same was confirmed experimentally.     

Color removal of monoazo acid dye from aqueous solution by adsorption and chemical coagulation

This communication presents the results of an investigation conducted on color removal from a monoazo acid dye, C.I. Acid Red 88, by adsorption onto coal based sorbents like Lignite coal, Charfines and Bituminous coal and F-400 Activated carbon and by chemical coagulation employing Aluminum sulfate, Ferric chloride, Manganese sulfate, Manganese chloride and Barium chloride.     

The impact of semiconductor, electronics and optoelectronic industries on downstream perfluorinated chemical contamination in Taiwanese rivers

This study provides the first evidence on the influence of the semiconductor and electronics industries on perfluorinated chemicals (PFCs) contamination in receiving rivers. We have quantified ten PFCs, including perfluoroalkyl sulfonates (PFASs: PFBS, PFHxS, PFOS) and perfluoroalkyl carboxylates (PFCAs: PFHxA, PFHpA, PFOA, PFNA, PFDA, PFUnA, PFDoA) in semiconductor, electronic, and optoelectronic industrial wastewaters and their receiving water bodies (Taiwan's Keya, Touchien, and Xiaoli rivers). PFOS was found to be the major constituent in semiconductor wastewaters (up to 0.13 mg/L). However, different PFC distributions were found in electronics plant wastewaters; PFOA was the most significant PFC, contributing on average 72% to the effluent water samples, followed by PFOS (16%) and PFDA (9%). The distribution of PFCs in the receiving rivers was greatly impacted by industrial sources. PFOS, PFOA and PFDA were predominant and prevalent in all the river samples, with PFOS detected at the highest concentrations (up to 5.4 μg/L).     

The impact assessment of Diwali fireworks emissions on the air quality of a tropical urban site, Hyderabad, India, during three consecutive years

Diwali is one of the largest festivals for Hindu religion which falls in the period October–November every year. During the festival days, extensive burning of firecrackers takes place, especially in the evening hours, constituting a significant source of aerosols, black carbon (BC), organics, and trace gases. The widespread use of sparklers was found to be associated with short-term air quality degradation events. The present study focuses on the influence of Diwali fireworks emissions on surface ozone (O₃), nitrogen oxides (NO _x ), and BC aerosol concentration over the tropical urban region of Hyderabad, India during three consecutive years (2009–2011). The trace gases are analyzed for pre-Diwali, Diwali, and post-Diwali days in order to reveal the festivity’s contribution to the ambient air quality over the city. A twofold to threefold increase is observed in O₃, NO _x , and BC concentrations during the festival period compared to control days for 2009–2011, which is mainly attributed to firecrackers burning. The high correlation coefficient (~0.74) between NO _x and SO₂ concentrations and higher SO₂/NO _x (S/N) index suggested air quality degradation due to firecrackers burning. Furthermore, the Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observation-derived aerosol subtyping map also confirmed the presence of smoke aerosols emitted from firecrackers burning over the region. Nevertheless, the concentration level of pollutants exhibited substantial decline over the region during the years 2010 and 2011 compared to 2009 ascribed to various awareness campaigns and increased cost of firecrackers.